Evaporators for Specific Applications
DRP Modular Evaporators for Tunnel Freezers
Spacing of 8 mm between fins
- Freeze speed due to high capacity and elevated air flow. Acts directly on the product
- Far less blockage in the fin assembly, due to spacing of 8 mm, permitting application at lower temperatures and with high air humidity.
- Operates with 1 to 4 compressor depending on the model. A single compressor can be used for any model following a simple adaption.
- Modular blocks, which can be disassembled and adapted to different installations, such as, for example, larger tunnels or cold rooms.
- For the size of the packaging, add the following measurements to the equipment dimensions: X + 200 mm, Y + 250 mm and Z + 250mm
- DRP = without electric defrost DRPD = with electric defrost DRPG = Inlet for hot gas defrost
- Voltage of the aforementioned fans is 3-phase 380V. To convert to 3-phase 220V multiply the value by 1.7.
- The above flows are stated for 60Hz, however the motorized fans also operate at 50 Hz, while in this case the flow drops by approximately 13% and the capacity by approximately 7%. Note: for application in other evaporation ranges, consult the Delta Frio Application Engineering department.